Mahr PS1 Accessories (Accessories / Surface Finish Gage Accessories) -- MeasureNOW Shopping Cart -- Accessories PS1 Mahr

<H1>Mahr PS1 Accessories -- MeasureNOW Shopping Cart</H1> $649.00 -- Mahr-Federal <table width="100%" cellspacing="0" cellpadding="0" bordercolor="#000000" border="1" id="table8"> <tbody> <tr> <td align="center"><img border="0" align="middle" src="https://www.nexternal.com/bcmac/images/ps1measstandpivot.jpg" /> </td> <td>PS 1 Measuring Stand With Pivot Order No. 2247087 <blockquote>Height Adjustment 0 mm to 104 mm (0 in to 4.10 in) Rectangular Foot 127 mm x 83 mm (5 in x 3.25 in) </blockquote> Convenient fixture with adjustable tilt bracket to hold the PocketSurf PS1. Designed for use on granite or other flat surfaces. Coarse and fine height adjustment knobs.</td> </tr> <tr> <td align="center"><img border="0" align="middle" src="https://www.nexternal.com/bcmac/images/ps1measstandfixed.jpg" /> </td> <td>PS 1 Measuring Stand (Fixed Horizontal) Order No. 2247085 <blockquote>Height Adjustment 0 mm to 104 mm (0 in to 4.10 in) Rectangular Foot 127 mm x 83 mm (5 in x 3.25 in) </blockquote> Convenient fixture with horizontal bracket to hold the PocketSurf PS1. Designed for use on granite or other flat surfaces. Coarse and fine height adjustment knobs.</td> </tr> <tr> <td align="center"> <img border="0" align="middle" src="https://www.nexternal.com/bcmac/images/ps1mountadapterbracket.jpg" /></td> <td>PS1 mounting adaptor to existing PocketSurf III stands Order No. 2245937 This bracket attaches to existing PocketSurf III height stands to modify them for use with the PocketSurf PS1. Modifies existing stand types EAS-2496, 2236687, EAS-3048 & EAS-2426</td> </tr> <tr> <td align="center"> <img border="0" align="middle" src="https://www.nexternal.com/bcmac/images/ps1mountingbracket.jpg" /></td> <td>Mounting Bracket to attach PS1 to existing Height Gages Order No. 2247086 Mounting bracket with tilt adjustment to attach a PS1 to many existing height gages (including Mahr 27E, 27ES & 814S) and other height gages with marker clamps accepting 0.450" H x 0.250" W scribes.</td> </tr> <tr> <td width="44%"> <img width="100" height="91" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P5.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P4.jpg" alt="" /> </td> <td width="55%"> Pick-up PHT 6-350 Order No. 6111526 <ul> <li>Type: single-skid pick-up with spherical skid</li> <li>Skid radius: in tracing direction R 25 mm, across R 2.9 mm</li> <li>Contact point: 0.8 mm in front of the stylus</li> <li>Measuring range: 350 μm</li> <li>Measuring force: 0.7 mN</li> <li> Specification: for flat surfaces, bores with a dia. Larger than 6 mm, and a max. depth of 16 mm, grooves with a width larger than 3 mm</li> <li>Stylus tip geometry as per EN ISO 3274, standard 5 μm/90°</li> </ul> </td> </tr> <tr> <td width="44%"> <img width="100" height="85" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P7.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P6.jpg" alt="" /> </td> <td width="55%"> Height adjustment accessory Order No. 6910202 <ul> <li> prism for stable use on cylinder surfaces</li> <li> height adjustment - max. height: 50 mm</li> <li> Replacement Stands may be ordered</li> </ul> </td> </tr> <tr> <td width="44%"> <img width="100" height="75" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P9.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P8.jpg" alt="" /> </td> <td width="55%"> Carrying case Order No. 7035693 <blockquote> For safe carrying and storage – with shoulder strap and belt loop. </blockquote> </td> </tr> <tr> <td width="44%"> <img width="100" height="79" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P11.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P10.jpg" alt="" /> </td> <td width="55%"> Pick-up protection Order No. 7028532 <ul> <li> material: plastic </li> <li> bores with a diameter larger than 10 mm </li> </ul> </td> </tr> <tr> <td width="44%"> <img width="100" height="91" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P13.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P12.jpg" alt="" /> </td> <td width="55%"> USB cable Order No. 2244919 USB cable to connect the Pocket Surf PS1 to a PC using a standard USB interface. USB 2.0 type A to 5 Pin Mini B, 6 foot (for use in backing up saved profiles and results files to a PC, or for use with MarSurf Explorer software ) </td> </tr> <tr> <td width="44%"> <img width="100" height="97" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P15.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P14.jpg" alt="" /> </td> <td width="55%"> Pocket Surf Charger with AC Adaptors Order No. 3018838 Plug-in power pack with three AC adaptors, for input voltages from 90 V to 264 V </td> </tr> <tr> <td width="44%" align="center"> <img width="100" height="91" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P17.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P16.jpg" alt="" /></td> <td width="55%"> Printer Order No. 4102040 Printer Cable Order No. 4102410 <ul> <li> Two-line display for simple dialog operation</li> <li> Real-time clock with date</li> <li> Measured values can be saved and transferred to a PC.</li> <li> Operates with AC adapter, batteries (AA) or rechargeable battery NIMH</li> <li> Application as interface to the PC possible</li> <li> Choice of languages: German, English and French</li> <li> List of measured values can be printed at any time from memory</li> <li> Scope of supply: Main supply plug, paper rolls</li> <li> RS-232 printer cable, length 2 m also used on Mahr-calipers)</li> </ul> </td> </tr> <tr> <td width="44%" align="center"> <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table9"> <tbody> <tr> <td align="center"> <img width="100" height="39" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P19.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P18.jpg" alt="" /></td> </tr> <tr> <td align="center"> <img width="100" height="65" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P21.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P20.jpg" alt="" /></td> </tr> <tr> <td align="center"> <img width="100" height="79" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P23.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P22.jpg" alt="" /></td> </tr> <tr> <td align="center"> <img width="100" height="79" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P25.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P24.jpg" alt="" /></td> </tr> </tbody> </table> </td> <td width="55%"> Accessory set Order No. 6910212 Set consists of 1 each of the following: <ul> <li> (1) Pick-up extension length - 80 mm 6850540 </li> <li> (1) Transverse tracing adapter 6850541 </li> <li> (1) Measuring stand mount 6910201 allows the MarSurf PS1 to be mounted on the Mahr ST-D/ST-F/ST-G family of measuring stands </li> <li> (1) End face vee-block: 6910203 Suitable for measurements on flat end face of cylindrical and planar components </li> <li> Or you may order some of these items separately: </li> <li> Pick-up extension length - 80 mm-6850540 </li> <li> Transverse Tracing Adapter-6850541</li> </ul> </td> </tr> <tr> <td width="44%" align="center"> <img width="100" height="48" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P26.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P1.jpg" alt="" /></td> <td width="55%"> Pick-up PHT 6-350, 2 μm/90°tip Order No. 6111520 <ul> <li> Type: single-skid pick-up with spherical skid </li> <li> Skid radius: in tracing direction R 25 mm, across R 2.9 mm </li> <li> Contact point: 0.8 mm in front of the stylus </li> <li> Measuring range: 350 μm </li> <li> Measuring force: 0.7 mN </li> <li> Specification: for flat surfaces, bores with a dia. Larger than 6 mm, and a max. depth of 16 mm, grooves with a width larger than 3 mm </li> <li> Stylus tip geometry as per EN ISO 3274, standard 2 μm/90° </li> </ul> </td> </tr> <tr> <td width="44%" align="center"> <img width="100" height="51" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P28.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P27.jpg" alt="" /></td> <td width="55%"> Pick-up PHT 6-350, 10 μm/90°tip Order No. 6111527 <ul> <li> Type: single-skid pick-up with spherical skid </li> <li> Skid radius: in tracing direction R 25 mm, across R 2.9 mm </li> <li> Contact point: 0.8 mm in front of the stylus </li> <li> Measuring range: 350 μm </li> <li> Measuring force: 0.7 mN </li> <li> Specification: for flat surfaces, bores with a dia. Larger than 6 mm, and a max. depth of 16 mm, grooves with a width larger than 3 mm </li> <li> Stylus tip geometry as per EN ISO 3274, standard 10 μm/90° </li> </ul> </td> </tr> <tr> <td width="44%" align="center"> <img width="100" height="64" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P30.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P29.jpg" alt="" /></td> <td width="55%"> Pick-up PHTR-100 Order No. 6111525 <ul> <li> For measurements on concave and convex surfaces</li> <li> Type: single-skid pick-up with spherical skid</li> <li> Skid radius: in tracing direction 0.3 mm, across 1.4 mm</li> <li> Contact point: 1.0 mm beside the stylus</li> <li> Measuring range: 100 μm</li> <li> Measuring force: 0.7 mN</li> <li> Stylus tip geometry as per EN ISO 3274, standard 2 μm/90°</li> </ul> </td> </tr> <tr> <td width="44%"> <img width="100" height="58" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P32.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P31.jpg" alt="" /> </td> <td width="55%"> Pick-up PHTF 0.5-100 Order No. 6111522 <ul> <li>For measurements on tooth flanks</li> <li>Type: aingle-skid pick-up with spherical skid</li> <li>Skid radius: in tracing directions 3.0 mm, across 3.0 mm</li> <li>Contact point: 0.6 mm beside the stylus</li> <li>Measuring range: 100 μm</li> <li> Measuring force: 0.7 mN</li> <li> Stylus tip geometry as per EN ISO 3274, standard 2 μm/90°</li> </ul> </td> </tr> <tr> <td width="44%"> <img width="100" height="137" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P34.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P33.jpg" alt="" /> </td> <td width="55%"> Pick-up set PHT Order no. 6910213 Kit includes: <ul> <li> (Qty 1) Pick-up PHT 3-350 (6111521)</li> <li> Skid radius: in tracing direction 25 mm, across 1.45 mm</li> <li> Measuring range: 350 μm, measuring force: 0.7 mN</li> <li> Specification: for plane surfaces, bores with a dia. larger than 3 mm and a max. depth of 16 mm</li> <li> Type: single-skid pick-up with spherical skid</li> <li> Stylus tip geometry as per EN ISO 3274, standard 2 μm/90°</li> </ul> (Qty 1) Pick-up PHT 11-100 Order No. 6111524 <ul> <li> Skid radius: in tracing direction 25 mm, across 7.9 mm</li> <li> Measuring range: 100 μm, measuring force: 0.7 mN</li> <li> Specification: for plane surfaces, bores with a dia. larger than 11 mm and a max. depth of 20 mm, grooves with a width larger than 2 mm</li> <li> Type: single-skid pick-up with spherical skid</li> <li> Stylus tip geometry as per EN ISO 3274, standard 2 μm/90°</li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="48" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P36.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P35.jpg" alt="" /> </td> <td width="55%"> Pick-up PT 150 Order No. 6111523 <ul> <li> Dual-skid pick-up for measurements on metal sheets and roller surfaces according to DIN EN 10049 (SEP). </li> <li>Type: dual-skid pick-up </li> <li> Skid: spherical skid </li> <li> Skid radius: in tracing direction 50 mm, across 3 mm </li> <li> Contact point: 4.5 / 17.5 mm in front of the stylus </li> <li> Measuring range: 150 μm </li> <li> Measuring force: 0.7 mN </li> <li> Stylus tip geometry per EN ISO 3274, standard 2 μm/90°</li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="77" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P38.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P37.jpg" alt="" /> </td> <td width="55%"> MarSurf PS1 Explorer software Order No. 6910205 <ul> <li> MarSurf PS1 Explorer software -Graphical PC interface to simplify transferring, viewing and printing results and profiles from the PS1 on a desktop PC. For use with Windows 2000/XP </li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="76" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P40.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P39.jpg" alt="" /> </td> <td width="55%"> MarSurf XR 20 software Order No. 6299009 <ul> <li> MarSurf XR 20 software Measuring and evaluation software on CD languages: German, English, French, Spanish, Italian working under Win98/win2000/XP; USB-dongle; cable </li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="103" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P42.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P41.jpg" alt="" /> </td> <td width="55%"> PRN Roughness Standard DKD Certified Order No. 6820420 <ul> <li> With Mahr calibration certificate. Roughness standard with turned profile, chromed. Profile depth approximately 10 μm (.394 μin). For calibrating roughness probes and drives. </li> </ul> PRN Roughness Standard NIST Certified Order No. 2240360 <ul> <li> With Mahr calibration certificate. Roughness standard with turned profile, chromed. Profile depth approximately 10 μm (.394 μin). For calibrating roughness probes and drives. </li> </ul> <blockquote> PMD-90501 Cert. Roughness Std. Ra, Rz, Rmax, Black Plastic Order No.PMD-90501 Cert Roughness Std.Sinusodal (Previous identified as PMD-90300 Order No. 2008143) Double patch NIST Certified Roghtness Std. Order No. 2238983 </blockquote> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="103" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P44.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P43.jpg" alt="" /> </td> <td width="55%"> PPS Parallel Vice Order No. 6710604 <ul> <li>For mounting rectangular and cylindrical workpieces</li> <li> Jaw width 70 mm (2.76 in), Jaw height 25 mm (.984 in), span 40 mm (1.58 in)</li> <li> Total height 58 mm (2.28 in).</li> <li> Weight 2 kg (4.41 lb).</li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="100" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P46.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P45.jpg" alt="" /> </td> <td width="55%"> PKS Ball Joint Vice Order No. 6710610 <ul> <li>Specially suited for workpieces that are not rectangular</li> <li>A Ball-and-socket joint that can be finely adjusted, swiveled and locked into any position</li> <li>Jaw width 70mm (2.76 in), Jaw height 25 mm (.984 in), span 40 mm (1.58 in)</li> <li> With two 11 mm (.433 in) mounting grooves</li> <li> 3.5 kg (7.72 lbs)</li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="104" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P48.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P47.jpg" alt="" /> </td> <td width="55%"> PP Vee-Block Order No. 6710401 <ul> <li> With four different prisms for mounting axis-symmetrical workpieces with diameters from 1 mm to 160 mm (.0394 in to 6.30 in). Dimensions (L x W x H) 100 mm x 80 mm x 40 mm (3.91 in 3.15 in x 1.58 in). Weight 1.5 kg (3.31 lb). Includes clamping springs for holding light </li> <li> workpieces in the prism. </li> </ul> </td> </tr> <tr> <td width="44%" align="left"> <img width="100" height="99" border="0" align="" xthumbnail-orig-image="../images/Mahrfederal/Pocket surf/Mahr_P50.jpg" src="https://www.nexternal.com/bcmac/images/Mahr_P49.jpg" alt="" /> </td> <td width="55%"> Measuring Stand ST- D Order No. 6710803 <ul> <li> Height Adjustment 0 mm to 300 mm using knob (0 in to 11.81 in) </li> <li> Triangle foot 175 mm x 190 mm x 385 mm </li> <li> Dimensions (6.9 in x 7.5 in x 15.2 in)</li> <li>Weight approximately 3 kg (6.6 lb) </li> </ul> Measuring stand Mount Order No. 6910201 Attaches PS1 to stand   </td> </tr> <tr> <td width="99%" align="left" colspan="2"> <ul> <li>PMD-90501 Cert. Roughness Std. Ra, Rz, Rmax, Black Plastic Order No.PMD-90501 </li> <li>Cert. Roughness Std-Sinusoidal (Previous identified as PMD-90300) Order No. 2008143 </li> <li>Double patch NIST Certified Roughness Std Order No. 2238983 </li> <li>Measuring Stand Mount (for ST-D,ST-F,ST-G Stands) Order No. 6910201 </li> <li>ST-F Measuring Stand (small granite) Order No. 2190832 </li> <li>ST-G Measuring Stand (small granite) with T-Slot Order No. 6710807 </li> <li>Universal Vice Order No. 6710607 </li> <li>Tension Clamp for V Block Order No. 6851303 </li> <li>Vee Block Set PPP Order No. 6710407 </li> <li>CT 120 Crosstable Order No. 6710529 </li> </ul> </td> </tr> </tbody> </table> <LI>Order Number: 2247087; 2247085; 2245937; 2247086; 6111526; 6910202; 7035693; 7028532; 2244919; 3018838; 4102040; 4102410; 6910212; 6850540; 6850541; 6111520; 6111527; 6111525; 6111522; 6910213; 6111524; 6111523; 6910205; 6299009; 6820420; 2240360; PMD-90501; 2008143; 2238983; 6710604; 6710610; 6710401; 6710803; 6910201; PMD-90501; 2008143; 2238983; 6910201; 2190832; 6710807; 6710607; 6851303; 6710407; 6710529 Other products in the category <A HREF="http://www.nexternal.com/bcmac/Category11" TITLE="Accessories">Accessories</A> / <A HREF="http://www.nexternal.com/bcmac/Category91" TITLE="Surface Finish Gage Accessories">Surface Finish Gage Accessories</A>: <LI><A HREF=http://www.nexternal.com/bcmac/Product568 TITLE="Certified Master 2008143">Certified Master 2008143</A> -- Mahr-Federal <LI><A HREF=http://www.nexternal.com/bcmac/Product569 TITLE="Chart Paper">Chart Paper</A> -- Mahr-Federal <LI><A HREF=http://www.nexternal.com/bcmac/Product433 TITLE="Pocket Surf Accessories">Pocket Surf Accessories</A> -- Mahr-Federal <LI><A HREF=http://www.nexternal.com/bcmac/Product570 TITLE="PRN 10 Master">PRN 10 Master</A> -- Mahr-Federal <A HREF="http://www.nexternal.com/bcmac" TITLE="MeasureNOW Products">MeasureNOW Products</A> <A HREF="http://www.measurenow.com">MeasureNOW</A> MeasureNOW <A HREF="http://www.nexternal.com" TITLE="shopping cart">shopping cart</A> powered by Nexternal

drill it, grind it, mill it, turn it . . .

. . . you still have to measure it.

HOME

	For Assistance Contact: The NOW Team Phone: 800-875-4243 Fax: 314-993-0405 Email: service@measurenow.com Join Our Mailing List
	Need Tooling?