Manual Probe Heads (CMM & Accessories) -- MeasureNOW Shopping Cart -- Heads Probe Manual

<H1>Manual Probe Heads -- MeasureNOW Shopping Cart</H1> $1,696.00 -- Renishaw <table width="100%" cellspacing="0" cellpadding="0" bordercolor="#000080" border="1" id="table1"> <tbody> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> PH1 </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table2"> <tbody> <tr> <td width="100%" valign="top"> A small manual probe head that is shank mounted for fitment onto a CMM <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table3"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="../images/Reinshaw/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  A small swivel head, adjustable in both the A and B axes, with limited overtravel protection. The probe is offset from the mounting shank Z axis.  </td> </tr> </tbody> </table> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table4"> <tbody> <tr> <td width="100%" valign="top"> <table width="100%" border="0" id="table5"> <tbody> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Weight (g) </td> <td valign="top" class="darkgrey8normal"> 125 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe Mounting</td> <td valign="top" class="darkgrey8normal"> M8 thread</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> No. of probe sockets</td> <td valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Overtravel break load</td> <td valign="top" class="darkgrey8normal"> Adjustable from 0.02 kgf (0.44 lbf) to locked solid</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication</td> <td valign="top" class="darkgrey8normal"> 1 LED</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection</td> <td valign="top" class="darkgrey8normal"> 5 pin DIN 180° socket</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> A-axis indexing</td> <td valign="top" class="darkgrey8normal"> Swivel of 115° locked with hexagonal key (3mm A/F)</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> B-axis indexing</td> <td valign="top" class="darkgrey8normal"> 15° steps through 360°</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Repeatability of position</td> <td valign="top" class="darkgrey8normal"> N/A</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Part Number: A-1049-1795 </td> </tr> </tbody> </table> </td> </tr> </tbody> </table> </td> <td width="50%" valign="middle" align="left"> <img height="292" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00603-180.gif" alt="" /> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> PH6 </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table13"> <tbody> <tr> <td width="100%" valign="top"> PH6 manual probe head <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table14"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="../images/Reinshaw/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  A compact, vertical probe head for a single probe, with an integral cable. Main features : <ul class="darkgrey8normal"> <li> Compatible with M8 probes. </li> <li> Shank mounted. </li> <li> Simple to install.</li> </ul> Note: Other shank/cable combinations are available, please contact Renishaw for your exact requirements. </td> </tr> </tbody> </table> <table width="100%" border="0" id="table15"> <tbody> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Weight (g) </td> <td valign="top" class="darkgrey8normal"> 48 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe Mounting</td> <td valign="top" class="darkgrey8normal"> M8 thread</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> No. of probe sockets</td> <td valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication</td> <td valign="top" class="darkgrey8normal"> 1 LED</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection</td> <td valign="top" class="darkgrey8normal"> Integral cable</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> A-axis indexing</td> <td valign="top" class="darkgrey8normal"> N/A</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> B-axis indexing</td> <td valign="top" class="darkgrey8normal"> N/A</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Repeatability of position</td> <td valign="top" class="darkgrey8normal"> N/A</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Order No. PH6 Probe Head </td> </tr> </tbody> </table> </td> <td> <img height="250" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00637-180.gif" alt="PH6 and TP20, fitted to a typical shank " /> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left"> PH6A </td> <td valign="middle" bgcolor="#800000" align="left"> PH6M </td> </tr> <tr> <td> <table width="100%" border="0" id="table16"> <tbody> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> The PH6A is designed for use with autojoint probes and allows you to change probes or add extensions without having to requalify the probe.  Special  order only.</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Number of probe sockets:</td> <td valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication:</td> <td valign="top" class="darkgrey8normal"> 1 led</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection:</td> <td valign="top" class="darkgrey8normal"> 5 pin DIN 180" socket</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Mounting options:</td> <td valign="top" class="darkgrey8normal"> Shank to suit your CMM</td> </tr> <tr> <td valign="top" align="center" colspan="2" class="darkgrey8bold"> Part Number: A-1051-0012</td> </tr> </tbody> </table> </td> <td valign="top"> <table width="100%" border="0" id="table17"> <tbody> <tr> <td valign="top" class="darkgrey8bold"> A fixed head with autojoint connection for probes and adaptors.  For use with TP&M, SP600M, and SP25M</td> <td valign="top" class="darkgrey8bold"> <img height="96" width="61" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00114-180.gif" alt="" /> </td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Number of probe sockets:</td> <td valign="top" class="darkgrey8normal"> 1 sutojoint</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication:</td> <td valign="top" class="darkgrey8normal"> 1 led</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection:</td> <td valign="top" class="darkgrey8normal"> Micro 'D' connector</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Mounting options:</td> <td valign="top" class="darkgrey8normal"> Shank to suit your CMM</td> </tr> <tr> <td valign="top" align="center" colspan="2" class="darkgrey8bold"> Part Number: A-1074-0020</td> </tr> </tbody> </table> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> MH8 </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table24"> <tbody> <tr> <td width="100%" valign="top"> Manual probe head <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table25"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="https://www.nexternal.com/bcmac/images/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  The MH8, positionally repeatable in 168 positions, is designed for use on small manual CMMs with short probe extensions and carries M8 probes.  </td> </tr> </tbody> </table> <table width="100%" border="0" id="table26"> <tbody> <tr> <td valign="top" class="darkgrey8bold"> Weight (g) </td> <td valign="top" class="darkgrey8normal"> 205 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe Mounting</td> <td valign="top" class="darkgrey8normal"> M8 Thread</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> No. of probe sockets</td> <td valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication</td> <td valign="top" class="darkgrey8normal"> 1 LED</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection</td> <td valign="top" class="darkgrey8normal"> 5 pin DIN 180° socket</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> A-axis indexing</td> <td valign="top" class="darkgrey8normal"> 0° to 90° in 15° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> B-axis indexing</td> <td valign="top" class="darkgrey8normal"> 180° in 15° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Repeatability of position</td> <td valign="top" class="darkgrey8normal"> 1.5µm (0.00006in) (TP2 and 10mm stylus fitted)</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Maximum extension bar</td> <td valign="top" class="darkgrey8normal"> 50mm (PEL1 only)</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Part Number: A-1332-002 </td> </tr> </tbody> </table> </td> <td> <img height="250" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00636-180.gif" alt="MH8 probe" /> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> MIH </td> </tr> <tr> <td> The manually indexable head (MIH) that is positionally repeatable in 720 positions <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table27"> <tbody> <tr> <td width="100%" valign="top"> The manually indexable head (MIH) that is positionally repeatable in 720 positions and features an LCD display and autojoint probe mount. The MIH is designed for use with long probe extensions for larger components. The MIH-S (manual indexable head - serial) is an enhanced version of the standard MIH which provides feedback of status and lock position to the CMM computer over an RS232 link via the MIH-SI interface. This enables the CMM computer to: <ul class="darkgrey8normal"> <li> verify that the MIH-S has been moved to the correct position and locked in place </li> <li> identify the position which the MIH-S has been locked into. </li> </ul> Measurement performance, functionality and dimensions as the same as for the standard MIH. </td> </tr> <tr> <td width="100%" valign="top"> Part Number A-1070-003 </td> </tr> </tbody> </table> </td> <td> <img height="250" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00618-180.gif" alt="" /> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> MIH-S </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table28"> <tbody> <tr> <td width="100%" valign="top"> A version of the standard MIH which provides feedback of status and lock position to the CMM computer <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table29"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="https://www.nexternal.com/bcmac/images/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  An MIH-SI (Part no. A-1373-0150) is required for feedback of status and lock position. For the separate probe signal positioning a Renishaw probe interface such as PI4-2 will also be required. </td> </tr> </tbody> </table> <table width="100%" border="0" id="table30"> <tbody> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Weight (g) </td> <td valign="top" class="darkgrey8normal"> 580 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe Mounting</td> <td valign="top" class="darkgrey8normal"> Renishaw Autojoint</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Head Mounting</td> <td valign="top" class="darkgrey8normal"> MS range of shanks</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Suitable interface</td> <td valign="top" class="darkgrey8normal"> PI4-2</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication</td> <td valign="top" class="darkgrey8normal"> LED</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection</td> <td valign="top" class="darkgrey8normal"> 'Hirose' type connector in line socket</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> A-axis indexing</td> <td valign="top" class="darkgrey8normal"> 0° to 105° in 7.5° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> B-axis indexing</td> <td valign="top" class="darkgrey8normal"> 180° in 7.5° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Repeatability of position</td> <td valign="top" class="darkgrey8normal"> 1.5µm (0.00006in) (TP20 and 10mm stylus fitted) 2.5µm (0.0001in) (EM2 extended module & 10mm stylus)</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Maximum extension bar</td> <td valign="top" class="darkgrey8normal"> EM2 extension module - 75mm (2.95 in)</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Part Number:A-1373-001 </td> </tr> </tbody> </table> </td> <td> <img height="250" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00618-180.gif" alt="" /> </td> </tr> <tr> <td height="21" valign="middle" bgcolor="#800000" align="left" colspan="2"> MH20 </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table18"> <tbody> <tr> <td width="100%" valign="top"> Manual probe head  <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table19"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="https://www.nexternal.com/bcmac/images/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  The MH8, positionally repeatable in 168 positions, is designed for use on small manual CMMs with short probe extensions and carries M8 probes.  </td> </tr> </tbody> </table> <table width="100%" border="0" id="table20"> <tbody> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Specifications:</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Weight (g) </td> <td width="34%" valign="top" class="darkgrey8normal"> 205 </td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Probe Mounting</td> <td width="34%" valign="top" class="darkgrey8normal"> M8 Thread</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> No. of probe sockets</td> <td width="34%" valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Probe status indication</td> <td width="34%" valign="top" class="darkgrey8normal"> 1 LED</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Cable connection</td> <td width="34%" valign="top" class="darkgrey8normal"> 5 pin DIN 180° socket</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> A-axis indexing</td> <td width="34%" valign="top" class="darkgrey8normal"> 0° to 90° in 15° repeatable steps</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> B-axis indexing</td> <td width="34%" valign="top" class="darkgrey8normal"> 180° in 15° repeatable steps</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Repeatability of position</td> <td width="34%" valign="top" class="darkgrey8normal"> 1.5µm (0.00006in) (TP2 and 10mm stylus fitted)</td> </tr> <tr> <td width="63%" valign="top" class="darkgrey8bold"> Maximum extension bar</td> <td width="34%" valign="top" class="darkgrey8normal"> 50mm (PEL1 only)</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> Order No. MH20 </td> </tr> </tbody> </table> </td> <td> <img height="250" width="180" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-00636-180.gif" alt="MH8 probe" /> </td> </tr> <tr> <td valign="middle" bgcolor="#800000" align="left" colspan="2"> MH20i </td> </tr> <tr> <td> <table width="100%" cellspacing="0" cellpadding="1" border="0" id="table21"> <tbody> <tr> <td width="100%" valign="top"> Manual indexing probe head  <table width="100%" cellspacing="0" cellpadding="0" border="0" id="table22"> <tbody> <tr> <td height="1" width="100%" bgcolor="#dddddd" background="../images/Reinshaw/transparent.gif"> <img height="1" src="https://www.nexternal.com/bcmac/images/transparent.gif" /></td> </tr> </tbody> </table>  The A axis rotates through 180 in the X-Y plane. The B axis rotates through 90 in the Z plane. A lever locks the head in one of up to 168 repeatable positions, set at 15 increments. Modules can be repeatably changed in each position without re-qualification, providing qualification has taken place in each position with each stylus/module combination.  </td> </tr> </tbody> </table> <table width="100%" border="0" id="table23"> <tbody> <tr> <td valign="top" class="darkgrey8bold"> Length (mm) </td> <td valign="top" class="darkgrey8normal"> 61 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Diameter (mm) </td> <td valign="top" class="darkgrey8normal"> 48 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Weight (g) </td> <td valign="top" class="darkgrey8normal"> 210 </td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe Mounting</td> <td valign="top" class="darkgrey8normal"> TP20 kinematic mount</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Head Mounting</td> <td valign="top" class="darkgrey8normal"> MS range of shanks</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Suitable interface</td> <td valign="top" class="darkgrey8normal"> PI4-2</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> No. of probe sockets</td> <td valign="top" class="darkgrey8normal"> 1</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Probe status indication</td> <td valign="top" class="darkgrey8normal"> 1 LED</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Cable connection</td> <td valign="top" class="darkgrey8normal"> 5 pin DIN 180° socket</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> A-axis indexing</td> <td valign="top" class="darkgrey8normal"> 0° to 90° in 15° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> B-axis indexing</td> <td valign="top" class="darkgrey8normal"> 180° in 15° repeatable steps</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Repeatability of position</td> <td valign="top" class="darkgrey8normal"> 1.5µm (0.00006in) (TP20 and 10mm stylus fitted) 2.5µm (0.0001in) (EM2 extended module & 10mm stylus)</td> </tr> <tr> <td valign="top" class="darkgrey8bold"> Maximum extension bar</td> <td valign="top" class="darkgrey8normal"> EM2 extension module - 75mm (2.95 in)</td> </tr> <tr> <td valign="top" colspan="2" class="darkgrey8bold"> <div align="center">Part No. MH20i</div> </td> </tr> </tbody> </table> </td> <td> <img height="408" width="270" border="0" align="" src="https://www.nexternal.com/bcmac/images/CMM-01372-180.jpg" alt="" /> </td> </tr> </tbody> </table> <LI>Model Number: PH1; PH6; PH6A; PH6M; MH8; MIH; MIH-S; MH20; MH20i Other products in the category <A HREF="http://www.nexternal.com/bcmac/Category27" TITLE="CMM & Accessories">CMM & Accessories</A>: <LI><A HREF=http://www.nexternal.com/bcmac/Product184 TITLE="CMM Fixture Kits">CMM Fixture Kits</A> -- Rayco <LI><A HREF=http://www.nexternal.com/bcmac/Product665 TITLE="Portable Arm CMM">Portable Arm CMM</A> -- Tesa MultiGage <LI><A HREF=http://www.nexternal.com/bcmac/Product567 TITLE="QC-330 Series">QC-330 Series</A> -- Metronics <LI><A HREF=http://www.nexternal.com/bcmac/Product463 TITLE="True Position Location Plugs">True Position Location Plugs</A> <LI><A HREF=http://www.nexternal.com/bcmac/Product194 TITLE="M2 Stainless Steel Base, Carbide Stem">M2 Stainless Steel Base, Carbide Stem</A> -- itpstyli <LI><A HREF=http://www.nexternal.com/bcmac/Product195 TITLE="M2 Stainless Steel Base & Stem">M2 Stainless Steel Base & Stem</A> -- itpstyli <LI><A HREF=http://www.nexternal.com/bcmac/Product192 TITLE="M4 Machine Tool Styli">M4 Machine Tool Styli</A> -- itpstyli <LI><A HREF=http://www.nexternal.com/bcmac/Product93 TITLE="Vision Fixturing Kits">Vision Fixturing Kits</A> -- itpstyli <A HREF="http://www.nexternal.com/bcmac" TITLE="MeasureNOW Products">MeasureNOW Products</A> <A HREF="http://www.measurenow.com">MeasureNOW</A> MeasureNOW <A HREF="http://www.nexternal.com" TITLE="shopping cart">shopping cart</A> powered by Nexternal

drill it, grind it, mill it, turn it . . .

. . . you still have to measure it.

HOME

	For Assistance Contact: The NOW Team Phone: 800-875-4243 Fax: 314-993-0405 Email: service@measurenow.com Join Our Mailing List
	Need Tooling?