Mac's Lift PL-50 (Residential Vertical Lifts) -- The Boulevard StoreFront Shopping Cart -- PL-50 Lift Mac's

<H1>Mac's Lift PL-50 -- The Boulevard StoreFront Shopping Cart</H1> MAC's Vertical Home Lifts were designed and engineered for home use. The PL-50 and PL-72 are sturdy enough to lift aud lower up to 500 pounds and will accommodate electric wheelchairs and scooters. <IMG SRC="https://store.nexternal.com/blvd/images/pl45_standard2.jpg" ALIGN=right ALT="Mac's Lift PL-50 " NAME="Mac's Lift PL-50 " BORDER=0 HSPACE=10> MAC's PL-50 Lift with Standard Platform See also:  <a href="http://www.blvd.com/storefront/mac/pl4590.html" target="newwindow">PL-50 with 90 degree Exit Platform </a> <center> NOTE: Tower is reversable from side to side MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. </center> MAC's PL-50 Lift Specifications <img height="2" src="https://oms.nexternal.com/Shared/OrderMgmt/htmledit/" width="400" border="0" /> <basefont size="3"> Description of Product The product described herein, manufactured by Mac's Lift Gate Inc., is a precision verfical platform lifting device consisting of a machine tower with lifting platform, selected and dimensioned to provide adequate lifting height to suit the residential building requirement. The lift can be used indoors and outdoors to vertically transport a wheelchair user or otherwise mobility-impaired person, up and over a low-rise barrier created by stairs, thus creating access to or within the building. The lift when configured with appropriate options can meet the ANSI Al 7.1 Part XX, Section 2100 codes, as it relates to residential applications. Quality Assurance <dir compact="false"></dir><ul> <li>Performance Requirements: The unit shall be assembled and prewired (less optional equipment and necessary gates) and manufactured with adequate lifting and load capacity for application described elsewhere in this specification. The unit shall be easy to operate by the user or attendant and shall be capable of functioning in all weather conditions. The unit shall have the capacity to lift up to 500 lbs. to the desired lifting height up to 50 inches or a maximum lift height of six ( 6 ) feet. <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> </li> <li>Composition of Materials: -Machine tower: 14 gauge cold rolled steel. -Base frame: 1 1/2" square x 3/16" Structural steel tubing. -Lift weldment: 1 1/2" x 3" x .188" wall structure steel tubing. -Tower cap: 10 gauge cold rolled steel plate -Side Guard Rails: 1" round x .120" gauge steel tubing (frame). -Platform: 14 gauge cold rolled steel plate with slip resistance surface. -Access ramp: 11 gauge steel plate with slip resistance surface. -Electrical box: 16 gauge galvanized steel -Switch box: Hi-impact A.B.S. Thermoplastic instrument case. -Lirnitations: Vertical platform lift shall operate both indoors and out, and must be anchored on a level, 4" thick, 3500 psi reinforcedconcrete surface or pad.</li> </ul> <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> <dir compact="false"></dir><blockquote><blockquote>1. 3 Stage wash, soapy water, clear water, and Iron Phosphate which is applied to parts. <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </blockquote> </blockquote> <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </basefont> MAC's PL-50 Lift with Standard Platform See also:  <a href="http://www.blvd.com/storefront/mac/pl4590.html" target="newwindow">PL-50 with 90 degree Exit Platform </a> <center> NOTE: Tower is reversable from side to side MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. </center> MAC's PL-50 Lift Specifications <img height="2" src="https://oms.nexternal.com/Shared/OrderMgmt/htmledit/" width="400" border="0" /> <basefont size="3"> Description of Product The product described herein, manufactured by Mac's Lift Gate Inc., is a precision verfical platform lifting device consisting of a machine tower with lifting platform, selected and dimensioned to provide adequate lifting height to suit the residential building requirement. The lift can be used indoors and outdoors to vertically transport a wheelchair user or otherwise mobility-impaired person, up and over a low-rise barrier created by stairs, thus creating access to or within the building. The lift when configured with appropriate options can meet the ANSI Al 7.1 Part XX, Section 2100 codes, as it relates to residential applications. Quality Assurance <dir compact="false"></dir><ul> <li>Performance Requirements: The unit shall be assembled and prewired (less optional equipment and necessary gates) and manufactured with adequate lifting and load capacity for application described elsewhere in this specification. The unit shall be easy to operate by the user or attendant and shall be capable of functioning in all weather conditions. The unit shall have the capacity to lift up to 500 lbs. to the desired lifting height up to 50 inches or a maximum lift height of six ( 6 ) feet. <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> </li> <li>Composition of Materials: -Machine tower: 14 gauge cold rolled steel. -Base frame: 1 1/2" square x 3/16" Structural steel tubing. -Lift weldment: 1 1/2" x 3" x .188" wall structure steel tubing. -Tower cap: 10 gauge cold rolled steel plate -Side Guard Rails: 1" round x .120" gauge steel tubing (frame). -Platform: 14 gauge cold rolled steel plate with slip resistance surface. -Access ramp: 11 gauge steel plate with slip resistance surface. -Electrical box: 16 gauge galvanized steel -Switch box: Hi-impact A.B.S. Thermoplastic instrument case. -Lirnitations: Vertical platform lift shall operate both indoors and out, and must be anchored on a level, 4" thick, 3500 psi reinforcedconcrete surface or pad.</li> </ul> <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> <dir compact="false"></dir><blockquote><blockquote>1. 3 Stage wash, soapy water, clear water, and Iron Phosphate which is applied to parts. <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </blockquote> </blockquote> <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </basefont> <center> NOTE: Tower is reversable from side to side MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. MAC's PL-50 platform lifting height is 50" maximum All lift options availible w this unit. </center> MAC's PL-50 Lift Specifications <img height="2" src="https://oms.nexternal.com/Shared/OrderMgmt/htmledit/" width="400" border="0" /> <basefont size="3"> Description of Product The product described herein, manufactured by Mac's Lift Gate Inc., is a precision verfical platform lifting device consisting of a machine tower with lifting platform, selected and dimensioned to provide adequate lifting height to suit the residential building requirement. The lift can be used indoors and outdoors to vertically transport a wheelchair user or otherwise mobility-impaired person, up and over a low-rise barrier created by stairs, thus creating access to or within the building. The lift when configured with appropriate options can meet the ANSI Al 7.1 Part XX, Section 2100 codes, as it relates to residential applications. Quality Assurance <dir compact="false"></dir><ul> <li>Performance Requirements: The unit shall be assembled and prewired (less optional equipment and necessary gates) and manufactured with adequate lifting and load capacity for application described elsewhere in this specification. The unit shall be easy to operate by the user or attendant and shall be capable of functioning in all weather conditions. The unit shall have the capacity to lift up to 500 lbs. to the desired lifting height up to 50 inches or a maximum lift height of six ( 6 ) feet. <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> </li> <li>Composition of Materials: -Machine tower: 14 gauge cold rolled steel. -Base frame: 1 1/2" square x 3/16" Structural steel tubing. -Lift weldment: 1 1/2" x 3" x .188" wall structure steel tubing. -Tower cap: 10 gauge cold rolled steel plate -Side Guard Rails: 1" round x .120" gauge steel tubing (frame). -Platform: 14 gauge cold rolled steel plate with slip resistance surface. -Access ramp: 11 gauge steel plate with slip resistance surface. -Electrical box: 16 gauge galvanized steel -Switch box: Hi-impact A.B.S. Thermoplastic instrument case. -Lirnitations: Vertical platform lift shall operate both indoors and out, and must be anchored on a level, 4" thick, 3500 psi reinforcedconcrete surface or pad.</li> </ul> <ul> <li>Electrical Wiring System: The unit shall be pre-wired by manufacturer with exterior grade thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is recommended if power source is not within three (3) feet of Machine tower. Machine may also be wired using water proof conduct. </li> </ul> <dir compact="false"></dir><blockquote><blockquote>1. 3 Stage wash, soapy water, clear water, and Iron Phosphate which is applied to parts. <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </blockquote> </blockquote> <blockquote><blockquote>2. Parts are inspected and scuffed </blockquote> </blockquote> <blockquote><blockquote>3. Epoxy Primer is applied </blockquote> </blockquote> <blockquote><blockquote>4. Parts are baked at 250 degrees for 15 minutes </blockquote> </blockquote> <blockquote><blockquote>5. Parts are inspected and scuffed if needed </blockquote> </blockquote> <blockquote><blockquote>6. Huebert O'Brian Powder- TCIC Polyester </blockquote> </blockquote> <blockquote><blockquote>7. Mixed with Paint, Color Almond PFT-500-SS </blockquote> </blockquote> <blockquote><blockquote>8. Powder Coat is applied and baked at 400 degrees for 30 min. </blockquote> </blockquote> <blockquote><blockquote>9. Parts are inspected and scuffed if needed </blockquote> </blockquote> Safety Devices The unit shall have the following safety features for protection of users and the general public: · Upper and lower limit switches · Instant Reverse Motor · Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp · Grounded electrical system · Heavy duty worm drive gear box with heavy duty #50 lifting chain · Automatic access ramp · 36" guard rails on non-enter and exit sides of platform · Non-Skid platform and access ramp surface · Key-lock control · Switching & Control system 24 VAC low voltage current Installation The contractor shall do all work and supply all materials necessary for the complete installation, It is the intent of this specification to outline broadly the equipment required but not to cover the details of design and construction. Maintenance Maintenance of the vertical platform lift unit shall consist of regular cleaning of the unit, protection of the painted surface of the unit. Warranty Unit shall have one ( 1 ) year limited warranty on the basic unit and electrical system with a two (2) year warranty of drive train components. Note: This specification has been written to assist you and your consumer in preparing an accurate and detailed description for specifying a vertical platform lift. All or part of this specification may be reproduced. Additional technical information is available from our Product Engineering Department. <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   <a href="http://www.blvd.com/storefront/mac/morepics.html" target="newwindow">For More Pictures.....click here.   </a>   </basefont> <LI>SKU: PL50 Other products in the category <A HREF="http://www.nexternal.com/blvd/Category107" TITLE="Residential Vertical Lifts">Residential Vertical Lifts</A>: <LI><A HREF=http://www.nexternal.com/blvd/Product296 TITLE=" Trus-T- Lift"> Trus-T- Lift</A> -- TrusTLift TrustLift's smooth and quiet performance makesthis light weight, dependable and versatile . . . <LI><A HREF=http://www.nexternal.com/blvd/Product52 TITLE="Mac's Lift PL-72">Mac's Lift PL-72</A> --   MAC's PL-72 Lift with Standard Platform                                      NOTE: . . . <LI><A HREF=http://www.nexternal.com/blvd/Product343 TITLE="Copy of Trus-T- Lift">Copy of Trus-T- Lift</A> -- TrusTLift TrustLift's smooth and quiet performance makesthis light weight, dependable and versatile . . . Related Products <LI><A HREF=http://www.nexternal.com/blvd/Product52 TITLE="Mac's Lift PL-72">Mac's Lift PL-72</A> <A HREF="http://www.nexternal.com/blvd" TITLE="The Boulevard StoreFront Products">The Boulevard StoreFront Products</A> <A HREF="http://www.blvd.com/storefront">The Boulevard StoreFront</A> The Boulevard StoreFront Online Store powered by Nexternal <A HREF="http://www.nexternal.com" TITLE="shopping cart software">shopping cart software</A>