<TABLE BORDER=0 TITLE="American Flagpoles and Flags" SUMMARY="American Flagpoles and Flags">
<TR>
<TD><H1><b>- Commercial Flagpoles</b></H1></TD>
</TR>
</TABLE>
<P>Outdoor Commercial Flagpoles <br /><br />GENERAL INFORMATION FOR ALUMINUM FLAGPOLES<br />Our cone tapered ground set aluminum flagpoles are precision fabricated from new, 6063-T6 tubing utilizing the industry’s most sophisticated, state-of-the-art manufacturing processes. The conical portion tapers approximately 1” in every 51/2 feet. Poles with overall lengths of less than 38’6” are shipped in one piece. Longer lengths are shipped in sections and will be factory fitted with a self-aligning sleeve which requires no field welding. Upon proper assembly a hair-line joint will occur. All poles are double spiral wrapped with protective paper and shipped in a hard fiber tube. <br /><br />“Warning” <br />The flagpole shaft will stain if allowed to remain in contact with wet or damp wrappings. If there is any sign that the shaft or its shipping tube has come in contact with water during shipment, remove it from the tube and unwrap immediately. If the shaft is to be stored outdoors, it must be stored unwrapped, and off the ground. If the shaft is to be stored indoors, it may be left in the wrappings and the tube, provided that it shows no sign of having been exposed to moisture, and that it will not be exposed to moisture during storage. All foundation dimensions listed in this catalog are intended for general guidelines only in good, firm, dry soil. It is recommended to consult and engineer for specific foundation dimensions suited to your exact location. “Warning” - Extreme care must be exercised when installing flagpoles near overhead power lines or when digging in the vicinity of buried cable or piping. Contact your local authorities before any digging.</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product68 TITLE="<big>Architectural Series of External Halyard Flagpoles 20' - 80'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/EC%20Series%20Blue%20Drawing1.gif" WIDTH=75 ALIGN=left ALT="<big>Architectural Series of External Halyard Flagpoles 20' - 80'</font></big>" NAME="<big>Architectural Series of External Halyard Flagpoles 20' - 80'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product68 TITLE="<big>Architectural Series of External Halyard Flagpoles 20' - 80'</font></big>"><big>Architectural Series of External Halyard Flagpoles 20' - 80'</font></big></A>
-- <B>$790.00</B>
-- Architectural Series Flagpoles 20' - 80'
These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country.
Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate.
All poles are made in America.
</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product71 TITLE="<big>Atlas Series of External Halyard Flagpoles 20' - 60'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/Atlas%20Series%20Blue%20Drawing%20Thumb.jpg" WIDTH=75 ALIGN=left ALT="<big>Atlas Series of External Halyard Flagpoles 20' - 60'</font></big>" NAME="<big>Atlas Series of External Halyard Flagpoles 20' - 60'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product71 TITLE="<big>Atlas Series of External Halyard Flagpoles 20' - 60'</font></big>"><big>Atlas Series of External Halyard Flagpoles 20' - 60'</font></big></A>
-- <B>$499.00</B>
-- Atlas Series Flagpoles 20' - 60'
These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country.
Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate.
All poles are made in America.
</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product69 TITLE="<big>Contractor Series of External Halyard Flagpoles 20' - 70'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/Economy%20Extra%20Series%20Blue%20Drawing%2011.gif" WIDTH=75 ALIGN=left ALT="<big>Contractor Series of External Halyard Flagpoles 20' - 70'</font></big>" NAME="<big>Contractor Series of External Halyard Flagpoles 20' - 70'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product69 TITLE="<big>Contractor Series of External Halyard Flagpoles 20' - 70'</font></big>"><big>Contractor Series of External Halyard Flagpoles 20' - 70'</font></big></A>
-- <B>$640.00</B>
-- Contractor (Economy Extra) Series Flagpoles 20' - 70'
These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country for contractors bidding purposes. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.
</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product73 TITLE="<big>Deluxe IH Series of Internal Halyard Flagpoles 20' - 80'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/Deluxe%20IH%20Series%20pic.jpg" WIDTH=75 ALIGN=left ALT="<big>Deluxe IH Series of Internal Halyard Flagpoles 20' - 80'</font></big>" NAME="<big>Deluxe IH Series of Internal Halyard Flagpoles 20' - 80'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product73 TITLE="<big>Deluxe IH Series of Internal Halyard Flagpoles 20' - 80'</font></big>"><big>Deluxe IH Series of Internal Halyard Flagpoles 20' - 80'</font></big></A>
-- <B>$1,050.00</B>
-- Deluxe IH Series Flagpoles 20' - 80'
These deluxe internal halyard flagpoles contain a winch mounted inside the flagpole shaft, operable only with a removable crank handle. As the stainless steel cable unwinds from the winch, it passes up through the inside of the flagpole shaft, over the truck sheave to the outside of the shaft, where the retaining ring provides a sliding anchor. A counterweight, heavily coated with neoprene, attached to the retaining ring, allows the halyard to be lowered for fastening or removing the flag. The halyard is then raised completely out of reach of vandals. The improved winch is gearless and self locking at any point, eliminating the need for a seperate brake. This direct drive winch provides rapid raising and lowering of the flag with little effort. This new, improved design does not require any welding, thus avoiding discoloration when an anodized finish is desired. No monthly lubrication is needed.
Due to the length and weight of flagpoles, shipping . . .</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product363 TITLE="<big>Fiberglass External Halyard Series 15' - 78'</font>"><IMG SRC="https://store.nexternal.com/boyles/images/Fiberglass%20Thumb.jpg" WIDTH=75 ALIGN=left ALT="<big>Fiberglass External Halyard Series 15' - 78'</font>" NAME="<big>Fiberglass External Halyard Series 15' - 78'</font>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product363 TITLE="<big>Fiberglass External Halyard Series 15' - 78'</font>"><big>Fiberglass External Halyard Series 15' - 78'</font></A>
-- <B>$360.00</B>
-- Fiberglass External Halyard Series 15' - 78'
Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.
Our fiberglass flagpoles are manufactured to duplicate the classic Greek Entasis taper design. All poles have an ultra-hard, gel coat finish that stands up to the harshest of weather conditions. Our rugged gel coat finish is especially well suited near salt water or in other extreme weather conditions - our poles will not corrode, pit or rust. Since fiberglass is a non-conductor, no grounding is required; thus installation is easy and inexpensive. Our standard flagpoles have either a Brilliant White or Dark Bronze pre-cast finish. Other colors are available upon request; please contact us for a quotation. Our innovative molding process produces a flagpole shaft with a tensile strength of 50,000 pounds per square inch. Inside a steel clam shell mold, seven layers of reinforced fiberglass . . .</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product70 TITLE="<big>Special Budget Series of External Halyard Flagpoles 15' - 35'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/Special%20Budget%20Series%20Blue%20Drawing1.jpg" WIDTH=75 ALIGN=left ALT="<big>Special Budget Series of External Halyard Flagpoles 15' - 35'</font></big>" NAME="<big>Special Budget Series of External Halyard Flagpoles 15' - 35'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product70 TITLE="<big>Special Budget Series of External Halyard Flagpoles 15' - 35'</font></big>"><big>Special Budget Series of External Halyard Flagpoles 15' - 35'</font></big></A>
-- <B>$225.00</B>
-- Special Budget Series Flagpoles 15' - 35'
These External Halyard Ground Set Cone Tapered Aluminum Flagpoles are an exceptional choice for all regions of the country. They are strong enough for commercial use, yet priced for residential use also.Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.
</P>
<BR clear=left><BR><P><A HREF=http://www.nexternal.com/boyles/Product72 TITLE="<big>Vanguard Series of Internal Halyard Flagpoles 20' - 40'</font></big>"><IMG SRC="https://store.nexternal.com/boyles/images/Vanguard%20Series%20Blue%20Drawing1.jpg" WIDTH=75 ALIGN=left ALT="<big>Vanguard Series of Internal Halyard Flagpoles 20' - 40'</font></big>" NAME="<big>Vanguard Series of Internal Halyard Flagpoles 20' - 40'</font></big>" BORDER=0></A>
<A HREF=http://www.nexternal.com/boyles/Product72 TITLE="<big>Vanguard Series of Internal Halyard Flagpoles 20' - 40'</font></big>"><big>Vanguard Series of Internal Halyard Flagpoles 20' - 40'</font></big></A>
-- <B>$800.00</B>
-- Vanguard Series Flagpoles
The Vanguard series of flagpoles combine the security of a concealed halyard system with the simplicity of a rope halyard. While lacking the the convience and sophistication of a winch operated system, the Vanguard provides an intelligent, economical alternative to the deluxe concealed halyard systems. The Vanguard's wire center halyard runs through a stationary truck and is secured in a cam-actioncleat located inside the flagpole behind a lockable access door. All fittings for a complete installation are included: gold anodized aluminum ball ornament, swivel flag snaps with vinyl covers, retaining ring, counterweight, a stainless steel quick link to make all necessary connections, spun aluminum flash collar and galvanized steel foundation sleeve. Due to the length and weight of flagpoles, shipping must be determined by phone. Please call 800-777-1706 for a shipping estimate. All poles are made in America.
</P>
<BR clear=left><BR><P><A HREF="http://www.nexternal.com/boyles" TITLE="American Flagpoles and Flags Products">American Flagpoles and Flags Products</A></P>
<BR clear=left><BR><BR><BR><BR>
<BR><A HREF="http://www.americanflags.net">American Flags</A> <A HREF="http://www.americanflags.net">Flagpoles</A> <A HREF="http://www.americanflags.net">State Flags</A> <A HREF="http://www.americanflags.net">country flags</A> <A HREF="http://www.americanflags.net">Historic Flags</A>
<BR>American Flagpoles and Flags <A HREF="http://www.nexternal.com" TITLE="ecommerce software">ecommerce software</A> powered by Nexternal
