CompuTrainer Pro -- RepartoCorse.com Shopping Cart
The Computrainer Pro enables you the most efficient trianing possible. Train by power and heart rate while improving your pedal stroke with Spin Scan.
The CompuTrainer Pro unit hardware includes the Racermate 1500 Watt Electronic Load Generator with the Posilock Rear Mount Stand, the Microprocessor Handlebar Controller with LCD Display to measure speed, power, cadence, calories burned, and heart rate, the Cadence Sensor, the Earclip Heartrate Monitor, the Front Wheel Support and Training Guide by coach Joe Friel.
The Hardware and Electronic System of the CompuTrainer creates resistance loads in excess of 1500 Watts. Independant laboratory tests have shown it equal in accuracy to instruments such as the SRM and Lode systems which cost much more. Because of its superior accuracy and outstanding durability, the CompuTrainer system has become the standard testing ergometer of national team and elite cycling and multi-sport coaches in the U.S.A., Canada and other countries.
The 3D Software included with the Pro provides a Panoramic 3D course, Grade Profiles to 15%, Scenery Selections of Painted Desert and Rolling Green Hills, Male or Female Pacer Riders, the SpinScan Bar & Polar modes in split screen, Custom Course Creation, Unlimited courses and saved races and free Downloads of prerecorded 3D courses.
The on-screen Data bar displays:
- distance
- lead
- lap time
- finish time
- calories
- instant/average/peak:
watts
cadence
heartrate
speed
Also included with the Pro is the CompuTrainer Coaching Software which provides detailed trining testing and recording functions for the best documentation and future training accuracy.
The CompuTrainer Pro requires a 9-pin serial port on the computer to operate. For computers having only USB ports, a USB-to-Serial adapter is always supplied - at no additional charge.
Other products in the category Accessories / Trainers & Rollers / CompuTrainer:
CompuTrainer Lab -- The Pro Lab 3D CompuTrainer has been calibrated on Racermate's dynamometer and sorted to a higher degree of accuracy than the standard Pro 3D CompuTrainer. It is ideally suited for MultiRider systems group racing/training and any other application such as coaching and testing where the highest possible degree of accuracy is desired.
The CompuTrainer Lab unit hardware includes the Racermate 1500 Watt Electronic Load Generator with the Posilock Rear Mount Stand, the Microprocessor Handlebar Controller with LCD Display to measure speed, power, cadence, calories burned, and heart rate, the Cadence Sensor, the Earclip Heartrate Monitor, the Front Wheel Support and Training Guide by coach Joe Friel.
The Hardware and Electronic System of the CompuTrainer creates resistance loads in excess of 1500 Watts. Independant laboratory tests have shown it equal in accuracy to instruments such as the SRM and Lode systems which cost much more. Because of its superior accuracy and outstanding durability, the CompuTrainer system has become the standard testing ergometer of national team and elite cycling and multi-sport coaches in the U.S.A., Canada and other countries.
The 3D Software included with the Lab provides a Panoramic 3D course, Grade Profiles to 15%, Scenery Selections of Painted Desert and Rolling Green Hills, Male or Female Pacer Riders, the SpinScan Bar & Polar modes in split screen, Custom Course Creation, Unlimited courses and saved races and free Downloads of prerecorded 3D courses.
The on-screen Data bar displays:
- distance
- lead
- lap time
- finish time
- calories
- instant/average/peak:
watts
cadence
heartrate
speed
Also included with the Pro is the CompuTrainer Coaching Software which provides detailed trining testing and recording functions for the best documentation and future training accuracy.
The CompuTrainer Pro requires a 9-pin serial port on the computer to operate. For computers having only USB ports, a USB-to-Serial adapter is always supplied - at no additional charge.
CompuTrainer Travel Case -- Take your Computrainer with you when you travel without paying excess baggage charges. The Travel Case Doubles as a suitcase for your clothes which also helps to cushion the CompuTrainer. This high quality, heavy duty case is "made In the U.S." to give many years of protective service.
Features:
Heavy Duty, 1000 denier black Cordura nylon with all surfaces foam padded.
Interior Velcro straps securely hold the Stand/Loan Generator assembly. Extra foam padding protects the Load Generator. Built-in packets hold the Handlebar Controller, Power Supply and Connecting Cables.
Four permanently attached wheels and Pull Strap.
Continental Home Trainer Tires -- There is now a tire designed specially for the indoor trainer. The Continental™ Home Trainer Tire is the best tire RacerMate has ever seen to help with the age-old problems of tire slip and sidewall/tread delamination. The benefits of this tire were evident from the moment we installed one on a bike. So quickly were we convinced of its benefits, we installed them on every dyno used to calibrate CompuTrainer. In use on our dyno's since October 2005, these tires last an extremely long time -- almost 10 times as long (and counting)!
Please note: This is a indoor trainer tire and is not designed for use on the road. It is advised to build a special "training rim" with this tire installed. This will also help maintain a true wheel for indoor trainer use, which is also crucial.
Handlebar Controller Mount -- This mount is for use with aerobars to accomodate the Computrainer controller.
Handlebar Controller Mount Version 2 -- This mount is for use with aerobars to accomodate the Computrainer controller.
This unit is easily mounted with a allen key.
Retrofit Wireless HRM Transmitter Kit -- The Retrofit version of the Wireless Fixed Frequency HR Receiver includes a non-coded chest strap -- for CompuTrainers purchased before 5/1/2005.
(This unit includes the Computrainer Handlebar Controller chip version 25.43.)
Wireless HRM Chest Strap -- This Replacement HRM Chest Strap Transmitter is compatible with Computrainer's Wireless Fixed HR Frequency Receiver.
Wireless HRM Transmitter Kit -- The Wireless Fixed Frequency HR Receiver includes a non-coded chest strap -- for new CompuTrainers purchased after 5/1/2005.
(This unitr requires the Computrainer Handlebar Controller version 25.43 or higher.)
RepartoCorse.com Products
bike parts frames campagnolo shimano fitting sram components accessories
RepartoCorse.com shopping cart powered by Nexternal