This product is manufactured in the USA by UUC.
E90/E92 swaybars now
available individually! Order complete set, or front-only, or rear-only.
NOW AVAILABLE FOR Xi MODELS ALSO!
Suitable for 335, 330, 328, 325 models (all body configurations)
Now you can have the exact same swaybars used in the official
BMW 335d
racecars!
More details on the racecars: http://www.caranddriver.com/features/12414/sport-the-day-and-night-of-the-diesel.html
What's a Sway Bar?
An anti-sway bar is a suspension component designed to reduce body
roll. It
keeps your vehicle flatter in the turns by transferring the pressure
exerted on
the outboard wheels and applying opposite pressure on the inboard
wheels. In
this way weight is more evenly applied to all four wheels, helping the
vehicle
stay more level with the road.
Technical details
As an example of our attention to detail, the E90 3-series Sway
Barbarians is a
very unique set of bars. Features include:
- Revised contouring for maximum clearance even with extremely lowered
cars.
- Precision-cut adjustable ends.
- Positive-stop rear bushing guides assure bar stays in place.
- adjustable front end links with fully isolated bearing for silent
operation -
no clunks or rattles.
- Urethane bushings, hardware kit, and lubrication included.
Superior Materials
We put our bars through this extensive process to insure that
the final
product will be the strongest, most durable bar on the market, and that
it will
be the most resistant to form alteration.
Adjustability
The SwayBarbarian uses a multi-hole system on the front and
rear bars which
allows for fine tuning of the bar for whatever desired effect, without
sacrificing body roll.
SwayBarbarian
Front Bar: 3 hole adjustment (2WD only, Xi non-adjustable)
Rear Bar: 2 hole adjustment
Positive-placement rear bushing stops
To keep the tight-tolerance rear bar from shifting
side-to-side, they are
fitted with postiive-placement stops, rings around the bar that hold
the bar in
place against the bushings.
Powdercoated Finish
After the bars are CNC mandrel bent and the ends are forged
and punched, a
silver powdercoat is applied for a smooth, long lasting finish in a
similar
process to how factory bars are coated. This smooth finish allows the
bars, when
properly installed with polyurethane bushings and grease, for long term
performance with minimal maintenance.
Polyurethane Bushings
The SwayBarbarians include replacement delrin-lined
polyurethane bushings
which are built to "aircraft spec" (literally - our urethane
fabrication facility uses the same material and production guidelines
as they do
for Boeing). This results in a durable bushing that will not
disintegrate and
has longer re-lubrication intervals for long lasting, quiet results. Be
sure to use generous amounts of grease to ensure maximum performance
from your
SwayBarbarians!