P/N's D200800+9002MPlug n Play' Marine Billet Distributors
Plug
'n play billet distributors are designed for maximum ignition
performance and easy installation all at a price that you can afford.
The Flame-Thrower Marine Billet distributors share many of the
performance features that you find in the automotive versions. Marine
approved distributors are designed to meet SAE J1171 standards. Each
distributor is precision machined for an exact fit. Distributor
features include:
- Integrated patented Ignitor II technology with adaptive dwell control.
- Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and high RPM vibration
- Adjustable mechanical advance with proprietary limiting functions permits multiple settings
- Distributors are factory set with a performance advance curve and additional springs are provided for custom advance curves
- Warranty: 30 months electronics / limited 1 year mechanical
FEATURES:
Ignitor
II systems develop up to 4x times more energy between 3000 and 5000
RPM than standard ignition systems. High RPM performance is improved
when used with the Flame-Thrower II super low resistance (0.6 ohms)
45,000 volt coil (available separately)
- Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance
- Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage
- Peak
current level is reached just prior to spark for maximum energy
without the heat build-up, increasing coil and module life
- Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay
- Senses
startup and develops more energy for quicker, easier starting. Built
in reverse polarity and over current protection shuts down the system,
preventing component damage
*** TECH NOTE: Ignitor II applications cannot be used with solid core ignition wires.***
These
Moroso Mag-Tune 8mm universal spark plug wires are fully tested to
ensure secure termination, electrical conductivity, and dielectric
strength. They feature moisture-resistant 100% silicone boots,
snap-lock spark plug terminals, and straight (180°) spark plug boot
ends. The Moroso Mag-Tune spark plug wires start with a conductive
latex-coated, heavy-duty fiberglass core and then add a spiral-wound
stainless nickel alloy conductor over the top. Added to that is a
fiberglass reinforcing braid, and they finish the construction with a
high-temperature EPDM jacketing. This wire set features black plug wires
with plug end assembled. Installer must "cut-to-fit" wires and assemble
distributor terminal ends on wires. Distributor terminal ends and
crimping tool is included. Coil wire is not included.
This
listing is for a 12-volt, negative ground PerTronix Flame-Thrower
"Plug n Play" marine billet distributor and a Moroso Mag-Tune 8mm
universal plug wire set for Chevrolet small (283, 327, 305, 350) and big
(396, 427, 454) block standard rotation V-8 engines. P/N
D200800+9002M. If you have any questions about fitment or
compatibility, please contact us before purchasing.
Part Number D200800+9002M
We are adding new part numbers daily. If you
don't see what you need, please call or eMail us. We will be glad to help in
any way!
800-821-1063 or
btoc@internalengineparts.com
THANK YOU for allowing us
the opportunity to earn your business!
