Speed Pro DDP Hypereutectic COATED Pistons About Speed Pro Digital Diamond Profile Hypereutectic Pistons:
Dominating the horsepower-per-dollar race.
These
Speed-Pro Digital Diamond Profile (DDP) hypereutectic pistons feature a
new digital actuated diamond turning process that produces precision
skirt profiles. This new Digital Diamond Profile (DDP) technology
creates a unique barrel profile of the pistons, promoting an oil wedge
between the piston skirt and the cylinder wall. They feature a newly
designed ring groove geometry using Thermal Arching Compensation (TAC)
that machines the piston ring grooves with an uptilt to offset thermal
arching distortion. This squares the ring face up to the cylinder wall
for increased power and decreased oil consumption. The Speed-Pro Digital
Diamond Profile hypereutectic pistons feature the next generation of
Duroshield skirt coating, reducing friction across the entire rpm range
and increasing wear resistance for longer life and superior noise and
vibration reduction. They also use precision-machined piston pin bores
that allow for either fixed or floating wrist pins; pin locks available
separately. The pistons come weight-matched to a 4 gram (+/-2 grams)
maximum variation within every engine set.
|
Federal Mogul/Speed Pro Piston Part Number
|
Application |
Power Range |
Special requirements |
Compression information
|
Ring groove size
Pin diameter
|
Rod length
Stroke
|
Deck clearance
Skirt clearance
|
H423DCP - We also have other piston sizes available.
*Rings available separately
|
Chevrolet 350ci V-8 - 4.000" bore (at STANDARD)
Recessed head
.070" deep x 2.750" diameter w/4-valve reliefs. DurOshield coated skirt
piston. Performance or regular duty operation. Not OE-duplicate weight.
Use in sets only.
1971-86 LD Truck (USA)
1967-90 Car (USA)
|
idle to 6000+rpm |
Good for street/strip or light race |
Compression distance: 1.540"
Piston head volume: -10.0cc
Compression ratio (+.030" bore):
w/58cc heads 9.45:1
w/64cc heads 8.90:1
w/72cc heads 8.27:1
w/76cc heads 7.99:1
|
5/64" 5/64" 3/16" ring grooves
.928" pin diam.
Press-fit
These pistons can be free floated but LR63 locks must be purchased separately.
|
Stock 5.700" length rods
Stock 3.480" stroke
|
.045" deck clr
.0010" skirt clr
|
|